Significant progress in the conversion of ETA Guidelines to EADs
Report no. 18 of the ITeC EOTA Office draws attention to the progress in the work of converting ETA Guidelines to European Assessment Documents-EADs. At the end of 2018, almost [...]
Publication of the EAD 090062-00-0404 on kits for ventilated and non-ventilated facades
On 16.11.2018, the reference to the European Assessment Document EAD 090062-00-0404 “Kits for external wall claddings mechanically fixed" was published in the Official Journal of the European Union, through Communication [...]
EOTA is accelerating the conversion works of ETA Guidelines to EADs
In the 17th report from ITeC EOTA Office, the main topic is the advance of the deadline to finish the ETA Guidelines conversion to European Assessment Documents-EAD. EOTA has committed [...]
Radical changes in the Construction Products Regulation are not welcomed by the sector
In the 16th report from ITeC EOTA Office, the main topic is the sixth meeting of the technical platforms for the revision of Regulation (EU) 305/2011. This meeting consisted of [...]
Conversion of the third set of ETA Guidelines to European Assessment Documents has begun
In the 15th report from ITeC EOTA Office, the main topic is the initiation of the conversion of the third set of ETA Guidelines to European Assessment Documents (EAD). Moreover, [...]
Meeting of the EOTA Working Group for fire retardant products at ITeC
On April 5, the first meeting of the European Working Group for the conversion of the ETA Guideline 028 into a European Assessment Document (EAD) took place. The meeting was [...]
Growth in innovative timber products
In recent years, there has been a development of technologically advanced timber products on the construction market. This development corresponds to increasing environmental needs and the possibilities that timber offers [...]
ITeC extends participation in EOTA
Since 1997, ITeC has been a member of EOTA-European Organisation for Technical Assessment, a framework in which it elaborates European Technical Assessments for CE marking for innovative products and for [...]
Santiago del Pozo nominated to EOTA Executive Board
At the General Assembly of EOTA- European Organisation for Technical Assessment- held last November, Santiago del Pozo was voted in as member of the EOTA Executive Board. At present, he [...]
Publication of nine ETA Guideline conversions to European Assessment Documents
In the 14th report from ITeC EOTA Office, the main topic is the publication of 9 ETA Guideline conversions to European Assessment Documents in the Official Journal of the European [...]